Load data for 9 mm Steyr (Roth) + .355 | 75gr | Lehigh Defense Controlled Fracturing

Recommended Powder(s): Rottweil P 801

Load Specifications

(Use the Personalized Load Calculator below to adjust )

Bullet:	.355 \| 75gr \| Lehigh Defense Controlled Fracturing
Manufacturer SKU:	C Fractur 02355075SP
Bullet Weight:	75gr \| 4.9g
Bullet Diameter:	0.355" \| 9.02mm
Bullet Length:	0.510" \| 13.0mm
Caliber:	9 mm Steyr (Roth) load data
Case Length (l3):	0.913" \| 23.2mm
Cartridge Length (C.O.L.):	1.117" \| 28.4mm
Seated Depth:	0.306" \| 7.8mm
Shank Seated Depth:	0.306" \| 7.8mm
Case Capacity:	17.4 Grains of Water \| 1.13 cm³
Primer Size:	Small Pistol (SP)
Max. allowed Pressure:	19580 psi \| 1350 bar
LID:	LID_B11035_C1226
Last updated:	2025-11-05

Load data for 74 loads in caliber 9 mm Steyr (Roth) with .355 | 75gr | Lehigh Defense Controlled Fracturing bullet and 37 powders such as Rottweil P 801. The key underlying parameters are shown in the table above.

Important Notice: DO NOT go below Minimum Charge or above Maximum Charge unless there are reasons. Since xxlreloading.com has no control over the equipment and components used by the customer and the data used in connection with the website, any responsibility and liability for the results achieved is rejected. Also see our Terms of Service.

Questions regarding the load data: Please read the information in the next tab "Explanations".
A load must fulfill certain criteria to be listed in the default view below - see "powder criteria to fulfill to be listed".

Our load data might deviate from other sources - see the "most common reasons for deviations".

All loads are based on the bullet and case dimensions shown under "Load Specifications" - see "reloading suggestions" if you deviate.

You can set your specifications in the "Personalized Load Calculator".

Go to the bottom of the "Dashboard " page to set the measure system (imperial vs. metric)
No data yet
C.O.L. (Inch)
C.O.L. (mm)
We recommend you limit powder range to relevant brands to speed up re-calculation of results
Use the Personalized Load Calculator to customize loads to your own specific requirements. Find more details in the help section.

Our default view only displays powders/loads that fulfill certain criteria: Max pressure of a load <=90% of Max. Standardized Pressure. Fill Rate (Min FR): >80% and <100% for rife loads, >60% and <100% for pistol loads. Min. Propellant Combustion (Min z): >90% for rifle loads , >80% for pistol/revolver loads. Relax these criteria at your own risk to potentially get more powders shown in the load tables.
Case Length (Inch)
Case Length (mm)
CaseCapacity (GoW)
Min z (%)
Min FR (%)
Max FR*
Barrel Length (Inch)
Barrel Length (cm)
Safety Buffer (%)
.

Click on the desired row in the tables below to add a specific load / powder to your Diary and manage there.

Powder	Charge	FR	MaxP	%	V(0)	z
ADI AP 70N	<<locked>>	74%	17129	87%	**32	94%
ADI APS 350	<<locked>>	67%	17448	89%	**55	100%
ADI APS 450	<<locked>>	69%	17477	89%	**88	100%
ADI AS 30	<<locked>>	77%	17056	87%	**47	100%
ADI AS 50N	<<locked>>	75%	16969	87%	**80	98%
Accurate Solo 1000	<<locked>>	75%	17361	89%	**47	99%
Accurate Solo 1250	<<locked>>	87%	17216	88%	**99	93%
[Alliant BULLSEYE]*	<<locked>>	74%	17434	89%	**19	87%
[Alliant Sport Pistol]*	<<locked>>	69%	17260	88%	**06	85%
[Alliant UNIQUE]*	<<locked>>	90%	17303	88%	**42	86%
Baschieri & Pellagri 100	<<locked>>	81%	17448	89%	**70	97%
Hodgdon Clays	<<locked>>	67%	17608	90%	**68	100%
Hodgdon Universal	<<locked>>	82%	17129	87%	**32	94%
Hodgdon CFE Pistol	<<locked>>	83%	16955	87%	**12	93%
[Hodgdon TrailBoss]*	<<locked>>	95%	5091	26%	**4	84%
Lovex S011	<<locked>>	66%	17027	87%	**50	94%
[Lovex S020]*	<<locked>>	82%	17231	88%	**19	89%
Maxam CSB 1	<<locked>>	90%	17434	89%	**99	93%
Maxam CSB 2	<<locked>>	95%	17172	88%	**85	98%
Maxam CSB 3	<<locked>>	82%	17056	87%	**89	97%
Maxam CSB 4	<<locked>>	78%	16882	86%	**73	99%
Maxam CSB 5	<<locked>>	73%	17129	87%	**53	100%
[Ramshot Silhouette]*	<<locked>>	72%	17216	88%	**12	83%
ReloadSwiss RS 12	<<locked>>	82%	17332	89%	**91	100%
[ReloadSwiss RS 20]*	<<locked>>	93%	17202	88%	**42	88%
Rottweil P 801 👍	<<locked>>	74%	17390	89%	**42	100%
[SNPE Vectan A0]*	<<locked>>	87%	17231	88%	**66	85%
SNPE Vectan BA 9	<<locked>>	78%	17506	89%	**70	91%
SNPE Vectan BA10	<<locked>>	65%	17463	89%	**88	100%
SNPE Vectan BA9 1/2	<<locked>>	81%	16998	87%	**93	93%
[Somchem MP200]*	<<locked>>	81%	17274	88%	**09	84%
[Somchem MS200]*	<<locked>>	84%	17564	90%	**09	88%
Vihtavuori N320	<<locked>>	81%	17187	88%	**22	99%
Vihtavuori N32C Tin Star	<<locked>>	97%	12227	62%	**52	100%
Vihtavuori N330	<<locked>>	86%	17274	88%	**55	95%
[Vihtavuori N340]*	<<locked>>	87%	17187	88%	**06	86%
Winchester 231	<<locked>>	67%	17303	88%	**93	95%

Max Load - Barrel Length: 5.50''

Powder	Charge	FR	MaxP	%	V(0)	z
[ADI AP 70N]*	<<locked>>	61%	11284	58%	**29	87%
ADI APS 350	<<locked>>	61%	15113	77%	**99	100%
[ADI APS 450]²	<<locked>>	59%	13242	68%	**79	100%
ADI AS 30	<<locked>>	60%	10646	54%	**50	98%
ADI AS 50N	<<locked>>	62%	11676	60%	**02	94%
Accurate Solo 1000	<<locked>>	62%	12270	63%	**96	95%
[Accurate Solo 1250]*	<<locked>>	63%	8804	45%	**7	80%
[Alliant BULLSEYE]*	<<locked>>	64%	12821	65%	**61	81%
[Alliant Sport Pistol]*	<<locked>>	61%	13300	68%	**78	80%
[Alliant UNIQUE]*	<<locked>>	79%	12908	66%	**01	80%
[Baschieri & Pellagri 100]*	<<locked>>	61%	9544	49%	**07	88%
Hodgdon Clays	<<locked>>	61%	15142	77%	**12	100%
[Hodgdon Universal]*	<<locked>>	62%	9544	49%	**56	84%
[Hodgdon CFE Pistol]*	<<locked>>	62%	9036	46%	**20	81%
[Hodgdon TrailBoss]*	<<locked>>	87%	4380	22%	**1	80%
Lovex S011	<<locked>>	61%	14518	74%	**75	92%
[Lovex S020]*	<<locked>>	68%	11008	56%	**15	80%
[Maxam CSB 1]*	<<locked>>	65%	8789	45%	**4	81%
[Maxam CSB 2]*	<<locked>>	62%	6614	34%	**1	81%
[Maxam CSB 3]*	<<locked>>	60%	8905	45%	**7	87%
Maxam CSB 4	<<locked>>	61%	10370	53%	**56	93%
Maxam CSB 5	<<locked>>	60%	11705	60%	**99	100%
[Ramshot Silhouette]*	<<locked>>	69%	15650	80%	**63	80%
ReloadSwiss RS 12	<<locked>>	62%	8673	44%	**86	92%
[ReloadSwiss RS 20]*	<<locked>>	80%	12256	63%	**68	80%
Rottweil P 801	<<locked>>	61%	11342	58%	**65	98%
[SNPE Vectan A0]*	<<locked>>	78%	13503	69%	**52	80%
[SNPE Vectan BA 9]*	<<locked>>	62%	10892	56%	**47	82%
SNPE Vectan BA10	<<locked>>	62%	15954	81%	**52	100%
[SNPE Vectan BA9 1/2]*	<<locked>>	61%	9456	48%	**27	82%
[Somchem MP200]*	<<locked>>	75%	14547	74%	**27	81%
[Somchem MS200]*	<<locked>>	71%	12227	62%	**29	80%
Vihtavuori N320	<<locked>>	62%	9427	48%	**56	92%
[Vihtavuori N32C Tin Star]*	<<locked>>	62%	4917	25%	**7	89%
[Vihtavuori N330]*	<<locked>>	62%	8354	43%	**10	80%
[Vihtavuori N340]*	<<locked>>	77%	12836	66%	**65	80%
Winchester 231	<<locked>>	62%	14344	73%	**04	92%

Start Load - Barrel Length: 5.50''

Any powder missing? Then click here.

FR ... fill rate of the cartridge in percent

MaxP ... max. pressure of load in psi or bar

% ... max. pressure of load in percent of the maximum allowed pressure for this caliber

V(0) ... muzzle velocity in feet per second (fps) or meters per second (m/s)

z ... powder burnt in percent

[...] *... not dangerous but load has suboptimal powder burnt with possible characteristics such as extensive muzzle flash or inaccurate loads.

[...] ²... fill rate low - you might want to consider using a filler to ensure proper ignition.

[...] ᴾ... possible press load - work up slowly to this load while watching for signs of excessive pressure.

👍 ... recommended powder/load for this caliber and bullet combination based on its ballistic performance.

<<locked>>... you need to buy an access license to unlock the data